SALTDOGG® 2.5-5.5 CUBIC YARD ELECTRIC AUGER SPREADER

14708F467211 РSALTDOGG® 2.5-5.5 CUBIC YARD ELECTRIC AUGER SPREADER

• Designed for dump bodies and flatbeds with a minimum 13,000 GVW (gross vehicle weight).
• Durable 304 stainless steel construction for optimum corrosion resistance.
• Powered by two independent electric motors for auger and spinner.
• Spreads bulk salt or a 50/50 sand/salt mix.
• In-cab controls with independent variable speeds for the conveyor and spinner.
• 18 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.
• 5-1/4 inch variable pitch auger with a 304 stainless steel adjustable inverted V for optimum corrosion resistance and material flow reduces stress on the drive line.
• 12 inch adjustable height swing-away spinner chute has three adjustable internal baffles and quick detach pins for convenient bulk unload, easy servicing, and access to towing.
• Four hinged top screens with 1/4 inch diameter bars included.
• Made in the U.S.A.

Buyers Products SaltDogg® 2.5-5.5 Electric Auger Spreader gives contractors and municipalities a heavy duty electric spreader ready for commercial use. The spreader is designed for use with dump bodies or flatbeds with a minimum 15,000 lb GVW (gross vehicle weight) chassis, depending on size of spreader. It works with bulk salt or a 50/50 sand/salt mix. The electric spreader offer a balance between the convenience and value of an electric spreader and the robust volume traditionally found in gas and hydraulic spreaders. The low maintenance auger design provides consistent material flow. The highly corrosion-resistant 304 stainless steel hopper features a fully-welded frame. It comes equipped with two hinged top screens with 1/4 in bars. The 5-1/4 inch variable-pitch auger is covered by an inverted V to reduce stress on the drive line and improve material flow. The auger is driven by a 3/4 HP, 12V motor, and the spinner is powered by an independent 1/2 HP, 12V motor. An 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing. The spreader includes a heavy-duty in-cab electric controller with independent auger and spinner adjustment and a vibrator switch. Here it is shown with optional spreader stand (3046442) sold separately.

• Capacity – 3.50 yd¬≥
• Chute Primary Material – 304 Stainless Steel
• ChuteStandardAdjustableExtended – Adjustable Height
• Controller Type – Dual Motor Variable Speed
• Feed Mechanism – Full Length Auger
• Feed Mechanism – 25 1/4in. Variable Pitch Auger
• Gearbox Ratio – Direct
• Hopper Material – 304 Stainless Steel
• Number Of Motors – 2
• Overall Length – 128.00 “
• Overall Width (At Top) – 70.00 “
• Spinner Diameter – 18.00 “
• Spinner Material – Polyurethane
• Spreading Width Range – 2 To 40 ‘
• Top Screen – Yes
• Trough Material – 304 Stainless Steel
• Vibrator Included? – No
• Works With Bagged #1 Rock Salt – Yes
• Works With Bulk Salt – Yes
• Works With Bulk Sand – Yes
• Works With Salt / Sand Mix – Yes
• Drive Type – Electric
• Hopper Length (In.) – 96.00 “
• Hopper Width (In.) – 70.00 “
• Overall Height (In.) – 46.00 “