SALTDOGG® 2.5-5.5 CUBIC YARD GAS CONVEYOR CHAIN SPREADER – 8FT

14708F461211 – SALTDOGG® 2.5-5.5 CUBIC YARD GAS CONVEYOR CHAIN SPREADER – 8FT

• Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight).
• High quality, 304 stainless steel construction for optimum corrosion resistance.
• Powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with an included battery for electric start.
• Spreads bulk salt, bulk sand, or a 50/50 salt/sand mix.
• In-cab controls with independent variable speeds for the conveyor and spinner.
• 18 in. poly spinner broadcasts up to 30 ft.
• Versatile 14-1/2 in. chain conveyor drive with 1/4 in. crossbars.
• Two chute baffles allow you to adjust the spread pattern to your use.
• Stainless steel inverted V reduces stress on the drive line and improves flow.
• Four hinged top screens with 1/4 in. bars included.
• Spreader is shown with optional light bar (8891144) , and pre-wet system (LS1) which are sold separately.
• Made in the USA

Buyers Products SaltDogg 2.5-5.5 Cubic Yard Hydraulic Conveyor Chain Spreader gives contractors and municipalities a heavy duty, durable spreader powered by 10-1/2 HP Briggs and Stratton Intek Industrial/Commercial gas engine, with in-cab electric start throttle control. The spreader combines the power of a gas engine with modern spreader conveniences. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix. The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis; depending on size of spreader.

The highly corrosion-resistant 304 stainless steel hopper features a fully-welded frame. It comes equipped with two hinged top screens with 1/4 in bars. The 14-1/2 in. wide, high-flow, steel pintle chain conveyor has 1/4 in. crossbars and a stainless steel floor. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on startup. A SaltDogg Spreader is built to last. A stainless steel inverted V reduces stress on the drive line to improve material flow. An adjustable feedgate with lock pin offers additional material flow control.

The spreader comes equipped with a 12V electric clutch and in-cab, three position momentary switch and throttle. An 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.

3007416 vibrator not included. Must be purchased separately.

Spreader is shown with optional light bar (8891144) and pre-wet system (LS1) which are sold separately.

• Capacity – 3.50 yd³
• Chute – Adjustable Height
• Chute Primary Material – 304 Stainless Steel
• Controller Type – In-Cab Throttle/Choke
• Feed Mechanism – Conveyor Chain
• Feed Mechanism – 214 1/2 in. Pintle Chain with 1/4in. Bars
• Gearbox Ratio – Direct
• Hopper Material – 304 Stainless Steel
• Number Of Motors – 1
• Overall Length – 116.00 “
• Overall Width (At Top) – 70.00 “
• Spinner Diameter – 18.00 “
• Spinner Material – Polyurethane
• Spreading Width Range – 2 To 40 ‘
• Top Screen – Yes
• Trough Material – 304 Stainless Steel
• Vibrator Included? – No
• Works With Bagged #1 Rock Salt – Yes
• Works With Bulk Salt – Yes
• Works With Bulk Sand – Yes
• Works With Salt / Sand Mix – Yes
• Drive Type – Gas
• Hopper Length (In.) – 96.00 “
• Hopper Width (In.) – 70.00 “
• Overall Height (In.) – 46.00 “