Nilfisk MH 4M 200/960 FA Three Phase Electrical Hot Water 2900 PSI Pressure Washer

NILFISK MH 4M 200/960 FA Three Phase Mobile Hot Water Pressure Washer

Free delivery to commercial addresses within Australia!   Factsheet HERE

Compact design with high performance – a simple, efficient cleaning tool.

The Nilfisk MH 4M 200/960 FA series continues to deliver high performance, ease of use, low noise and high cleaning efficiency in a three phase hot water pressure washer designed to be used for around FOUR HOURS PER DAY.

The Tornado Plus double pipe lance has pressure regulation on the lance, and a separate low pressure nozzle for optimal rinsing, which enables using low pressure detergent.

QuickService concept give low running and maintenance costs, robustness, durability and high cleaning efficiency.

Heating costs are reduced with the award winning Diesel powered EcoPower boiler ( > 92% efficiency). Sound level is reduced thanks to the 1450 rpm motor.

This Package Includes:

1 x SKU 101119496 Ergo Coupling 1 x SKU 106404529 3/4 inch M/F Coupling Kit

1 x SKU 301001100 15M DN8 2 wire hose W Ergo Female coupling

1 x SKU 301002410 Ergo2000 Gun W Hose Swivel

1 x SKU 106403010 Tornado Plus 1120 Lance W/O nozzle

1 x SKU 101119741 Tornado Nozzle 0500 Ind Ring Yellow

NOTE: This machine will be delivered by a truck and someone must be there to unload it.

Features:

* Three Phase Electrical Power * 2,900 PSI Max Water Pressure

* Fully ceramic 3 piston pump. With brass cylinder head. *Stainless Steel Boiler Coil

* Easy to use control panel: all controls in one place.

* Ergo accessory system for additional user comfort.

Specifications:

* Cable Length; 5 meters * Power; 6.1 kW * Current; 12.3 Amps

* Supply Voltage: 230V Three Phase * Supply Frequency; 50 Hz

* Water Flow: QMAX  16 Lit/Min  QIEC 15 Lit/Min.

* Water Temp (Water/Steam); 90/150C   * Max Input Water Temp: 40C

* Pump: 1450RPM 200Bar/ 2,900PSI  * Cleaning Impact: 5kg/force

* Fuel: Diesel * Fuel Consumption; 4kg/Hr* Fuel Tank Capacity; 15lit

* Removable Detergent Tank Capacity; 10lit

* High Pressure Hose; 10Meter DN6 single wire hose  * Nozzle Size; 0500

* Mass; 150kg * Dimensions; 105cm Long x 69cm Wide x 76cm High

OPERATING INSTRUCTIONS

1. Don’t use a surface cleaner above 60 degrees

1. Check the fuel level before use.

1. Check the detergent container is full, and the dial turned off.

1. Pre-select the desired temperature.

1. If the steam is to be used, set the temperature to maximum and back off the steam dial which is found next to the pressure guage two turns anti-clockwise.

1. Then switch on the unit.

IMPORTANT

WHEN HOT WATER / STEAM HAS BEEN USED AND UNIT IS NOT BEING USED FOR AT LEAST 10 MINUTES, TURN THE TEMPERATURE DIALS DOWN AND FLUSH UNIT THROUGH WITH COLD WATER UNTIL THE LANCE IS COLD.

Hot water units should only be used for a maximum of 2 hour at a time before resting for at least one hour, with power and water supplies turned off.

Maximise the FREE FREIGHT offer on this item, on our website, anything purchased along side it, such as in the related items below, will also be shipped free, Australia wide!